How to Use a Star Point for Analog Ground and Digital Ground Connection

July 7, 2017 CircuitStudio

Untitled design (9).jpg
 

 

I’ve found that the hardest part of dating for me is meeting people in the first place. As an engineer, I spend a large portion of my life in front of a computer, not out mingling. That’s one reason I think dating websites and apps are a great idea. They help me make connections I might never be able to otherwise. Forming a bond with another person is difficult, but linking analog and digital ground planes are even harder. Noisy digital chips can cause interference in your nice analog circuits. Thus they have to be separated, but they still need to be referenced to the same ground. If you connect the planes willy nilly you can create more problems than you solve. That’s where the star ground comes in. A star ground will let you join together different grounds for certain mixed signal circuits.

 

The Mixed Signal Grounding Problem

Like dating, grounding mixed signal PCBs is a complex issue with many problems and solutions. You know that you need to keep your analog and digital signals separate to reduce EMI, but they also need to be grounded together. Improper grounding can result in large ground loops that will radiate noise in, and possibly around, your circuit.

 

The main problem on mixed signal boards is digital circuits. Digital switching chips can be quite noisy, which would not be a problem if they were alone. However, when paired with analog circuits digital EMI will often find itself mingling with sensitive analog signals. That’s why you should generally try to keep these two systems separated.

 

Separating analog and digital circuits creates another issue, though, a floating ground. Your analog and digital chips all need to be referenced to the same ground in order to operate properly. If you connect your separate analog and digital ground planes wherever you want you can create ground loops. Large ground loops will act like antennae and radiate EMI to other parts of your board, and possibly out of your device. A star ground allows you to connect your analog and digital circuits together at a single point. This reduces the possibility of ground loops and EMI radiation.

 

asterisk icon
All ground connections should terminate at your star ground.

 

Star Ground

A lot of people have tried to describe love and failed. I’m not that bold so I’ll just outline star grounds. A star ground is a single point that connects analog and digital grounding planes so as to eliminate ground loops. It doesn’t necessarily have to be in the shape of a star, but the idea is that each connection is made at a single central point.

 

If you want to have two girlfriends at the same time (which I don’t recommend) you should keep them separated. In the same way, your analog and digital circuits should interact as little as possible. You should use separate power rails for each, and connect them only at the star point. This will ensure that ground loop areas are minimized and that analog and digital signals don’t mix and interfere with each other in the ground planes.

 

When to Use Star Grounds

In my experience it’s not enough to just know what to do, you need to know when to do it. I know couples hold hands, but I’ve found that I shouldn’t try to hold hands right after sneezing. There are some situations where using a star ground is appropriate, and some where it’s not.

 

The perfect time to use a star ground is when you have a single PCB with a single ADC/DAC on it. In that kind of system, you can make your star point the grounding point for your converter. Then, connect your analog and digital ground planes on either side of the converter at that same point as well. This will help you greatly reduce noise in your mixed signal circuit and make grounding a breeze.

 

Like I said earlier, once you get into more than one relationship, things get complicated. If you’re designing a multi-card system, or are using more than one converter, a star ground might not work for you. The problem is that you’ll have more than one star point, creating the potential for lots of ground loops. The whole idea of a star ground is that everything is connected at one point. If you can’t connect everything at one point, don’t even try.

 

electronic circuit
Keep your circuit well grounded.

 

People aren’t meant to stay separated, but analog and digital signals certainly are. If you don’t properly ground your mixed signal circuit, things will get noisy. A star ground can help reduce EMI on your PCB and keep everything in its right place. However, you should take care to only use a star ground in systems with a single converter. Once you get into more complex systems creating a single star point becomes almost impossible.

 

Online dating can make your love life much simpler. CircuitStudio can make your work life easier. It has a great selection of advanced features that will help you design a board with minimal EMI.


Have more questions about star grounds? Call an expert at Altium.

Previous Article
 Advantages of Massive MIMO for 5G Cellular Infrastructure
Advantages of Massive MIMO for 5G Cellular Infrastructure

Massive MIMO arrays have several benefits that make them perfect for implementing 5G technologies.

Next Article
How FRAM Memory Simplifies Embedded System Data Logging
How FRAM Memory Simplifies Embedded System Data Logging

FRAM might be compromise between SRAM and Flash that you’ve been searching for.

Get My CircuitStudio Free Trial Today.

Free Download