5 Tips for Specifying PCB Hole Size Tolerance

January 12, 2017 Aron Hanks

PCB hole size tolerance example for manufacturing

 

One of the crucial yet often overlooked aspects of PCB design are the holes through which components are mounted. Specifying the tolerance of hole dimensions in PCB fabrication ensures proper fit of plated-through-hole (PTH) components. Just as important, those dimensions must be clearly communicated to the fabricator so that the boards are properly made.

Now, Altium Designer® PCB design software allows you to add hole tolerance attributes for your pads and vias that will be communicated to the fabricator by inclusion in the drill table. Here are five tips to help you quickly specify hole sizes in your next PCB design:

 

specify-hole-tolerance

1. Set and Specify Hole Tolerance Attributes for Specific Pads and Vias

You can quickly set the pad/via tolerances using the properties of each.
Right-click on the pad or via and select Properties. In the Pad Properties dialog (Figure 1), hole tolerance can be edited under the Hole Information section.

 

hole-tolerance-specified-in-pad-properties-dialog
Figure 1: Hole Tolerance Can Be Specified in the Pad Properties Dialog.

 

  • In the Via Properties dialog, hole tolerance can be edited using Tolerance, in the top left-hand corner of the dialog (Figure 2).

 

hole-tolerance-specified-in-via-properties-dialog
Figure 2: Hole Tolerance Can Also Be Specified in the Via Properties Dialog.

 

2. Creating Hole Tolerance Attributes for a Pad or Via Template

You can also specify hole tolerances using a pad or via template.

  • Right-click in the Pad Via Library panel and select Add Via Template or Add Pad Template. Hole tolerance can be set under the Hole Information section.

 

3. Setting Hole Tolerance Attributes for Multiple Pads or Vias at Once

Conveniently, you can set the hole tolerance for multiple pads or vias at the same time (Figure 3, Figure 4).

  • Open the PCB Inspector panel. Select the pads or vias on the PCB that you wish to set and enter the necessary hole tolerance values in the panel, in the right-hand column under Object Specific.

 

hole-tolerance-for-multiple-holes-and-vias
Figure 3: Set Hole Tolerance for Multiple Holes and Vias Using the PCB Inspector Panel.

 

  • Hole tolerance columns can also be added to and edited from the PCB panel, using the Hole Size Editor. Right-click under the Unique Holes header and select Columns » Hole Tolerance (+) and Hole Tolerance (-). By clicking in the hole tolerance columns, the tolerance attributes can be changed.

 

hole-tolerance-values
Figure 4: Multiple Hole Tolerance Values Can Also Be Added in the PCB Dialog.

 

4. Adding Hole Tolerance to Via Stitching/Via Shielding

Hole tolerances can be added for multiple stitching vias to save time (Figure 5).

  • Go to Tools » Via Stitching/Shielding » Add Stitching to Net. Hole tolerance information can be added under Tolerance in the Via Style section.

 

adding-hole-tolerance-to-stitching-vias
Figure 5: For Adding Hole Tolerance to Stitching Vias, Use the Add Stitching to Net Dialog.

 

5. Displaying Hole Tolerance in the Drill Table

You can view the tolerances in the drill table in two ways: one or two columns to display tolerance attributes.

  • From the Drill Table Properties dialog, click Add Column. To view all tolerances attributes in one column, select Hole Tolerance. This column will display the minimum and maximum set attributes together. Alternatively, you can choose to show the minimum and maximum set hole tolerance attributes in separate columns. For the latter option, select Hole Tolerance (+) and Hole Tolerance (-). You can of course also choose to display only the minimum or maximum set hole tolerance independently.

 

example-drill-table-showing-all-hole-tolerance-columns
Example Drill Table Showing All Hole Tolerance Columns.

 

You can also choose to group objects by their hole tolerance. From the Drill Symbols dialog (click Configure Drill Symbols in the Drill Table dialog), click Grouping and select Hole Tolerance.

Note that when adding hole tolerance information to pads and vias, unless all pads or vias grouped under the Count column have the same hole tolerance attributes, hole tolerance values will be displayed as an * (asterisk).

IMPORTANT: After adding columns to drill table, you must click OK to exit the Drill Table dialog or your changes will not be saved.

 

Ensure Your Board is Manufactured Properly with Altium Designer

Ensuring that you properly specify hole tolerance is critical for your PTH parts to properly mount to your PCB. Altium Designer has made the documentation of your hole size tolerances simple, with your tolerance specifications easily added to the drill table, so that they can be clearly communicated to your fabricator.

Interested in learning more about the PCB hole size tolerance capabilities in Altium Designer? Download the free white paper 5 Tips for Specifying PCB Hole Size Tolerance today.

 
 

 

About the Author

Aron Hanks

Aron is an Applications Engineer at Altium with a demonstrated history of working in the computer software industry. Skilled in Sales, ECAD, SolidWorks, VBScript, Databases, Graphic Arts and Shooting Video. He is a strong engineering professional.

More Content by Aron Hanks
Previous Article
Experience a Completely Unified Design Environment
Experience a Completely Unified Design Environment

With today’s ever growing market expectations, strict project deadlines, and increasingly complex designs, ...

Next Article
How to Pack More Complexity into a Smaller Footprint Using HDI
How to Pack More Complexity into a Smaller Footprint Using HDI

Using HDI to meet the needs of shrinking form factors has its own set of unique challenges in your design p...

Get My Altium Designer Free Trial Today.

Get Free Trial