Stackup Impedance Profiles Manager
Manage multiple impedance profiles for stripline, microstrip, single or differential pairs
Other content in this Stream
1:28How to add existing designs to a multi-board project
It can be stressful keeping track of all of the individual boards in your multi-board assembly. A multi-board schematic gives you a system-level design insights to keep your design organized. Learn ho
2:18How to Setup and Use Courtyard, Assembly and Other Component Layer Pairs in Altium Designer 19
8:09How to Calculate Impedance for Single and Differential Transmission Line in Altium Designer 19
Learn how to configure, define, and use your design’s impedance requirements for single-sided and differential on each layer, with Altium Designer’s Layer Stack Manager.
0:52How to Define Reference Plane for Impedance Calculation in Altium Designer 19
Learn how to define reference planes for your design’s impedance calculations.
1:28How to Use Stack Up Materials Library in Altium Designer 19
Learn how to use and leverage Altium Designer’s large array of predefined material definitions, and ensure your boards are always built with only compliant materials.
1:03How to Use Follow Contour Routing Mode in Altium Designer 19
Learn how to use Altium Designer’s Follow mode to lock your routing to any contour with any angle.
0:57How to Check Layer Stack Symmetry in Altium Designer 19
Learn how to enable, set, and check for your layer stack symmetry.
2:30How to Set Up and Use Buried and Blind Vias in Altium Designer 19
Learn how to define, setup, and use blind and buried vias in your designs.
1:45How to Switch Layers During Routing in Altium Designer 19
Learn how you can quickly change and switch between layers during interactive routing.
0:42How to Insert Transmission Line Table for Impedance Controlled Fabs in Draftsman in Altium Designer 19
0:37How To Show The Topology of Your Board on Your Draftsman Assembly View in Altium Designer 19