Hartley in the early days of PCB design doing mylar tapeups by hand.
Judy Warner: Rick, will you start by giving us a brief history of your background, career, and what kind of products you have designed?
Rick Hartley: I started life in electronics in 1965 at the age of 20. I was a technician for several years in an R & D department, going to school at night, studying electrical engineering. After a while, I moved to field service, spent a couple years there, then moved into an engineering department as a “designer”. “Designers” in those days designed circuit boards, packaging, wire harnesses, cables, anything that was in the product, except for the circuit itself. I spent several years doing that and then, with enough education under my belt, was moved to an EE role where I spent several years designing circuits.
At one point, my boss came to me and said, "Look, you have a history of PCB design, we have a lot on the table in the way of circuit boards. Would you mind splitting your time 50/50 between circuit design and circuit board design for the next six months?" I said, "Sure, I wouldn't mind at all.” So, I did and after six months realized that my real love was in circuit board design, not circuit design. I made a conscious decision to move from circuit design back to circuit board design. A lot of designers, when they heard that, thought I was a little crazy.
Warner: I bet they did! It seems like a counterintuitive career move.
Hartley: Yes, they said, "What a masochist, who is this guy?" But I really enjoy circuit board design more than circuit design. It was a conscious decision. Fortunately, it was a lateral move, they kept me at the same pay scale. When I left and moved on to other companies I was fortunate to be able to continue to be paid at the EE level. For me, it worked out very well.
Warner: What kind of products have you worked on over the years?
Hartley: Products I've worked on over the years ... Most of my early experience was in industrial controls for factory floors that use closed loop feedback systems to control what went into a product. For example, we measured plastics as they were being made. We would control how much resin and how much air went into the mix to make sure it was distributed properly, that it was the right thickness and the right mixture of all materials. So our system basically measured the plastic as it was being made and controlled its flow. We did that with paper, with all sorts of products. Probably the first 17 or so years of my career was in that industry. From there, I moved into the design of computers because by then it was the eighties.
Warner: I remember that time well—it was an explosion of electronics for personal computers and peripherals.
Hartley: I first worked for a company that did ruggedized computers that could be put into all sorts of environments. We had a computer you could drop off the top of a three-floor building and it would still work.
Warner: What were the applications? Like construction sites and such?
Hartley: All sorts of sites where things got bounced around a lot and they wanted them to be able to work even under heavy stress. So, factory floors, military field applications, that sort of thing. From there I moved into avionics in the early nineties, where I spent several years. In the late nineties, I moved into the telecom world, spent five years there and then in 2002, the telecom world, as you know, just collapsed.
Warner: It certainly did.
Hartley: I then moved back to avionics in 2003 and spent the rest of my working career, until 2014, in the avionics world. So, the majority of the products I've worked on have been industrial controls, computers, avionics, and telecom equipment. Now I am semi-retired, teaching and doing some consulting.
Hartley teaches regularly at conferences around the US.
Warner: And the last place you worked full time was at L-3 Communications, right?
Hartley: That's right. It was called L-3 Avionics Systems. We designed and manufactured avionics for both commercial and military aircrafts. They're still thriving today, that's a great company, they're doing really well.
Warner: That's always good to hear these days. When I last saw you at IPC APEX in February, I was sitting in one of your classes and you asked people in the room to raise their hand if they were an EE who also designed boards. Then you asked them which was more challenging, EE work or laying out circuit boards. Why did you ask that question, and why do you think that most of us were surprised that they said PCB layout was more challenging?
Hartley: The first time I ever asked that question was in 2008, at PCB West. I met two people in my class who had been doing both circuit design and PCB design for around 20 years. I asked them: "In your opinion, which is most challenging?” This guy literally scoffed and he said, "Oh, printed circuit design's way harder than circuit design." Every EE in the room turned and looked at him with such incredulousness--you cannot imagine the looks he got!
Warner: Oh, that's funny! What do you think was going through their minds?
Hartley: They were upset, basically these two guys were shooting holes in their paradigm. The reason was because there was a time when circuit board design was truly connecting the dots and it was more art than science. It wasn't very technically challenging in those days. Some engineers believe it is still that way, but over the last 25 to 30 years, printed circuit board design has become a true engineering task. We have always had to solve the maze of placement and routing, while maintaining manufacturability. Today, you need do all that and understand signal integrity and field theory, as well as have some understanding of how circuits work. As you heard me say in that power distribution class, at IPC APEX this year, the energy is in the fields. Once you grasp that, you start to really understand where the energy moves in a circuit. That makes all the difference in the world as to how you should design. People who get the true nature of both professional positions do understand that circuit board design really is the harder of the two jobs. That's why I ask the question and that's why I think most of you were surprised, because you didn't expect to hear the answer they gave. They, just like the two guys in 2008, they said, "Oh yeah, board design's harder."
Warner: And they were clearly speaking from a place of experiential knowledge because they'd been at it for a long time, just like you have. I think most of us might think, if we put design professionals in a hierarchy, based on difficulty, that EEs would be higher in the pecking order.
Hartley: Exactly. EE work requires a deeper level of technical education than board design, but once that knowledge is acquired, daily challenges are greater in the PCB design arena. I do occasionally meet dual functioning people who think that EE work is harder, but they are the exception.
Warner: To your point, PCB design has become so much more complex. Especially when you get into RF, microwave, millimeter-wave, and high-speed digital, it seems to get incredibly complex.
Hartley: Well the reality is, circuit board designers today need to have a little bit of circuit theory under their belt. They need to be able to look at a schematic and know what's going on. They don't need to know the intimate details of the circuit but do need to understand it well enough to know what the processor and FPGA are doing, how memory plays into the circuit, how things are being driven and accessed. These are all items they need to understand at least well enough to know how components should be placed relative to one another to get routed transmission lines to behave as expected. And they need to understand field theory and signal integrity issues like impedance control, and proper termination. They need to know how to set up the power bus. Where do you put the decoupling caps, under the BGA or next to the BGA? The answer to that question is completely dependent on where the planes are in the board. Many engineers don't know that, most printed circuit designers do. There's a lot of engineering involved in printed circuit design these days.
Warner: I've noticed, since I returned to the industry around 2009, that many very bright engineers are being asked to design their own boards. When I took a break from the industry in 1998—those two roles were distinct most of the time. EEs just don't know what they don't know in regards to layout, particularly when it comes to high-performance boards, and sadly it causes a lot of unexpected problems.
Hartley: Yes, but you know what's going to happen? They'll make the mistakes that most people make when they first move into this field, like make traces too small to be manufacturable, just for ease of routing. They're going to not design for the assembly or fab processes or set boards up to be testable. They will not balance copper in and on the board. They'll use the wrong dielectrics in the board or place plane and trace layers in a manner that doesn't create balanced stack-ups or good containment of fields. They're going to do all the things that new engineers classically want to do that experienced board designers instinctively know not to do. I’ve known engineers who want to put an odd number of layers in the board. Every experienced designer knows better and knows why.
Warner: It's just unfortunate that it keeps happening over and over again, one person at a time. I have a lot of compassion for them!
Hartley: Wouldn't it be nice if there was an essential training course somewhere to be able to teach people who want to do printed circuit design correctly, how to?
Warner: You think they would integrate it as part of the EE coursework by now.
Hartley: You would think so. Another sad issue, a lot of EEs don't realize the value of PCB West.
Warner: Oh gosh yes, the courses you guys teach are like gold--not to mention the level of expertise. You're there, Dr. Eric Bogatin, Gary Ferrari, Susy Webb and many others. All veterans who've suffered all the mistakes and become experts that are eager to teach others how to take the shortcuts and not make the same mistakes.
Hartley: The value of the classes people teach at PCB West is massive! There are the folks you mentioned and others like Dan Beeker, Mark Finstad, Phil Zarrow, Keven Coates, Doug Brooks, Mike Creeden and Doug Smith, just to name a few. There are instructors from fab and assembly houses, material suppliers, CAD companies, and numerous other industry experts.
Warner: Which leads me to my next question--you've become a signal integrity and high-speed guru. How did that happen?
Hartley: Well, it started in the late seventies when I was doing RF board layout. Because I was an EE also, the RF engineer I was working with put a lot of trust in what I did because he knew I understood his goals and what he needed. So, we worked well together. Through him I started to grasp the concept of a waveguide. The fact is, a lot of people think only RF circuits have waveguides, because that's what engineers refer to them as in that domain. The truth is, any transmission line that's operating above low frequencies is a waveguide. A signal line and its return path, steer the fields through the dielectric… that's a waveguide. Yes, RF circuits are waveguides but so are most circuits. So, it started in the seventies with this RF engineer. For a while after that I went back to digital design, up through the mid-eighties. But it was in the later eighties that IC rise times became fast enough that we were having noise and EMI problems in our circuits. Frankly, none of us understood why. We were all scratching our heads thinking, "Why is this happening?” What we didn't know is that it wasn't related to the clock frequency of the circuit, it was related to rise times. Over a period of a few years, from the late eighties into the early nineties, I figured this out by looking at circuits in the lab, measuring the fields that were emanating from them using near-field probes and a spectrum analyzer and looking at the signal rise times. Finally, I realized there's a direct relationship between signal rise time and the fields coming from these circuits. Once all that hit me, it started to fall into place. Then I went to PCB West for the first time in 1993 and sat through Lee Ritchey's class. I realized, listening to what the man was teaching, this guy has a lot of knowledge. I learned a lot from him that I'd never thought about before, but it all made sense. The pieces fit with everything I'd learned up to that point in my life. So, I set about trying to put all these pieces together and over a period of two or three years, it all became a plan of how to control signal integrity in circuits and how to control and contain fields so that we didn't have noise and interference problems. All of that just came together through a combination of experience and training. That's when I also started buying books. From 1990 until now, I have purchased over 100 different books.
You can't name an author who's written about signal integrity, high-speed design, EMI or noise control, whose books I don't own. Henry Ott, Dr. Howard Johnson, Dr. Eric Bogatin, Dr. Bruce Archambeault. All of these guys--I own all of their books and all the other people like them. Kimmel and Gerke, Terrell and Keenan, Ralph Morrison-- just every book you can think of. It was a combination of what I already knew coupled with reading, then putting two and two together.
Over about a ten year period from '85 to '95, I moved into a position of deeper understanding of these issues. 1996 is when I started teaching, as I thought, "You know, I know enough about this, I can probably pass some of my advice and knowledge on to others as well." And that was my goal, to help others.
Warner: That's great and I know so many people have benefitted from your willingness to teach. Besides, you're a natural teacher, too.
Hartley: Thank you, that's kind of you to say.
Warner: Well, you really are. People enjoy learning from you because you teach in such a plain-spoken way that even someone like me, without a formal technical education, can understand.
Hartley: That's the idea. Many people who attend these classes are printed circuit designers who don't have an engineering background. Yet, they understand that circuit board design has become an engineering discipline. They need to understand this stuff and my goal is to convey it to them in a manner that's not confusing.
Warner: The first time we met, Rick, we were carrying on about how we both wished more designers would visit their board suppliers and learn more about how boards are manufactured. Would you be willing to discuss that further and share a few pieces of advice for today’s Engineers and PCB Designers in our next newsletter?
Hartley: I’d be happy to do that.
Warner: Great, thank you very much, Rick. I look forward to continuing this conversation and passing on some of your hard-won wisdom.
Hartley: Looking forward to it and thank you, Judy.
About the Author
Judy Warner has held a unique variety of roles in the electronics industry since 1984. She has a deep background in PCB Manufacturing, RF and Microwave PCBs and Contract Manufacturing with a focus on Mil/Aero applications in technical sales and marketing. She has been a blogger, writer, contributor and journalist for several industry publications such as Microwave Journal, The PCB Magazine, The PCB Design Magazine, PDCF&A and IEEE Microwave Magazine and is an active member of multiple IPC Designers Council chapters. In March 2017, Warner became the Director of Community Engagement for Altium and was immediately tasked with the launch of Altium’s monthly On Track Newsletter. She was also instrumental in launching AltiumLive 2017: Annual PCB Design Summit in San Diego and Munich, a newly founded annual Altium User Conference. Her passion is providing resources, supporting and advocating for PCB Designers around the world and acting as brand ambassador for Altium.Follow on Twitter More Content by Judy Warner