Don’t Settle for Better Late Than Never: Packing and Shipping Your PCBs

January 29, 2018 CircuitStudio

Blue routing lights in the shape of a gift-wrapped present

 

I mailed my last Christmas present yesterday, a few weeks after the holidays are over. I’m only a little embarrassed; I like to do a very precise job with wrapping even if I’m not terribly concerned with punctuality. The package was for a friend overseas who had a craving for her favorite American candies. Let me tell you: a beautiful wrapping job on a bag of fun-size Butterfingers is no mean feat.

 

Wrapping and packaging are more than ornamental when you’re packing up a PCB. Before you get anything produced by a new manufacturer, you should ask about packaging. You want to be sure that your board is adequately protected. If a Butterfinger is damaged in shipping, you still get delicious crumbs, but a PCB can’t always be salvaged.

Why does the packaging matter?

If you don’t have an obsessive need for square corners and symmetric tape, then fussing over your PCB packaging probably seems like a waste of time. As long as the boards don’t get crushed in shipping, everything is fine, right? PCB packaging is almost as specific as the PCB function. You designed your PCB to protect it from its expected operating environment and you need to wrap your PCB up to protect it from hazards of shipping and storage.

 

Shipping hazards range from the obvious dropping and crushing, but other mechanical damage can also occur. In extreme heat or cold, boards can warp, solder can creep and crack. You might have someone handle the packages who, like me, shakes boxes very aggressively to find out what’s inside.

 

Less obvious damage sources are the same things you protect PCBs from: moisture and electrostatic shock. It’s possible to get any, all, or none of the types of damage to your boards during shipping. It just depends on how well they’re protected and how aggressively they’re shaken.

 

PCB manufacturing machine in color

Try not to shake your manufacturing machinery.

 

What types of packaging are there?

Packaging varies based on what you need to protect against. The protection is not always obvious just from looking at the wrapping, so it’s helpful to have a little background:

 

Tissue paper and bubble wrap: Unless you’re shipping bare PCBs (which just have a rubber band holding them together), this is probably the most basic packaging you’ll see. This is fine for very simple, robust boards, but if you have more sensitive components, you probably want to step it up.

Pink poly: Pink poly is a type of plastic wrap that provides ESD protection. It comes as plastic wrap, bags, and bubble wrap. In addition to the cushion of a pink poly bubble wrap, it protects against shocks that occur when the box full of boards is packed and unpacked. You should be aware that the material is not compatible with certain plastics, especially polycarbonate, so select your materials accordingly.

ESD Bags: Many ESD sensitive components and some larger hardware will get shipped in ESD bags. They are shiny, silver plastic, and often have a Ziploc style seal. You can get these in various sizes, and have your ESD sensitive boards packed into individual bags to keep them safe from static shocks during transit

Moisture barrier: If your PCBs are moisture sensitive (most are, at some level), or will be shipped by ocean freight, or through a humid climate, look at moisture barrier packaging. Your PCBs will be individually sealed, probably with a little packet of desiccant, to keep out moisture in the air, regardless of where the boards travel en route to you. Moisture barrier packaging is usually puncture resistant, too, so it gives a little extra protection to your boards.

Vacuum sealed: For the hardcore moisture sensitive applications, you can have all the air sucked out of the packaging around your PCB. I think it looks like a neater version shrink wrap, and of course, I prefer everything neat and tidy. You can also get vacuum sealed ESD packaging if you need protection on multiple fronts.

 

 

    Vacuum sealed bag.

Vacuum sealing is used for food, electronics, and anything else that needs to be protected from air and moisture during shipping.

 

What do I need for my PCB?

Choose a packaging that’s going to provide adequate protection for your board. After designing and manufacturing, you don’t want the boards to get damaged in transit. If you are receiving multiple boards in a single shipment then have them packaged based on their custom requirements. I wrap a drone very differently than a bag of candy bars, but I want them both to arrive unscathed.

 

When you’re getting PCBs manufactured ask what the standard packaging is. Find out about pricing for other options. If pink poly bubble wrap is enough, and they usually vacuum seal, you might be able to get a discount. If you have concerns, ask to get a sample of the packing material before they start manufacturing anything for you. If you are on-site for an audit, watch their packing methods, and take a good look at the materials they are using.

 

While not as fun as picking wrapping paper, making careful decisions on packing will keep all your hard work from going to waste right at the end. On the other hand, a good decision to make right at the beginning is which PCB design software to use. With easy and smart manufacturing outputs, intuitive drawing processes, and strong templates to work off of, Altium’s CircuitStudio is a great option.

 

If you’re looking to know more about your PCB manufacturing process, and how your design software can make it easier, consider talking to an expert at Altium today.

 
Previous Article
Take the Fear out of PCB Form Factors with These Four Considerations
Take the Fear out of PCB Form Factors with These Four Considerations

When trying to fit a million things into a single device, how can you mitigate issues that arise when deali...

Next Article
How is Your Design Affected by PCB Component to Edge Clearance?
How is Your Design Affected by PCB Component to Edge Clearance?

You’ve got one board, and a thousand components to place. Knowing your component to edge clearances will gi...

Get My Altium Designer Free Trial Today or Call 1-800-544-4186

Get Free Trial