Getting Your Layer Stack Done Right the First Time

Chris Carlson
|  Created: February 21, 2017  |  Updated: November 20, 2020

pcb-layer-stack

Failure to properly design the layer stack is a common mistake in PCB assembly. This blunder often occurs during the final stages of fabrication, but can easily be prevented by including the appropriate features in the beginning stages of PCB design. Read on to learn about what layer stackup features you’ll want to include in your design.

One of the most common mistakes during the PCB fabrication process is improper layer order. If left unchecked, it can cause an entire design process to fail. The PCB assembly process may function from an electrical continuity standpoint. It may even pass an electrical inspection. However, in designs where the order of plane to signal layers and the proximity of layers with respect to each other is paramount, failures will occur at the final functional assembly level. How can we prevent this from happening?

Layer Stacks: It’s All About the Details

In order to guarantee that the fabricator has the required information to order the layers properly and perform a post-process visual inspection, details must be engineered directly into the copper geometry. It is the responsibility of the PCB designer to include these features in the design to provide a mechanism for the inspection of the final assembly. These features include:

  • Accurately identifying layers with a defined numbering scheme in relation to all other layers.

  • Adding stacking stripes to facilitate easy visual inspection of the layer order.

  • Providing test traces that allow for easy verification of post-etch copper thickness and width.

layer-stack-legend

Designing the proper copper features into the fabrication data provides a high degree of confidence that the proper layer stackup order will be achieved. By providing these details early on, you can streamline the manufacturing process by preventing issues, reducing costs, and saving time.

Want to learn how to add the features you need to get your layer stack done right the first time? Download our free whitepaper about Getting the Layer Stack Right.

About Author

About Author

Sr. Field Application Engineer Chris Carlson came to Altium in August of 2007 and brings with him his background in power electronics, data acquisition, and controls. Chris earned his Bachelor of Science degree from Oregon State University in 1993 and has worked as a design engineer in the Bio-Medical, Industrial Controls, Motor Drive, and Defense industries.

Related Resources

Related Technical Documentation

Back to Home
Thank you, you are now subscribed to updates.