An Introduction to Multi-board Design in Altium Designer

September 17, 2018 Altium Designer

puzzles in multi-board design

 

I have heard that brain games are a good way to stay sharp, not to mention ward off some of the nastier mental incapacities. One of my favorite ways to implement this advice is by doing puzzles. Although, I love the crossword puzzles where you complete the words from a given clue, I think puzzles that require you to put the pieces together can be the most challenging, especially when it is a group activity. It reminds me of one the more daunting problems for engineers and PCB designers, which is multi-board design. Not only are the board layout steps multiplied by X (the total number of PCBs), but they also have to be interconnected. These issues are exacerbated when the multi-board design is being done by multiple designers.

 

Fortunately, the developers of Altium Designer (AD) have built in specific functionality that allows you and your colleagues to easily build and collaborate on multi-board designs. After all, your boards should not have an unmanageable design process to them. You should be able to clearly understand where traces need to go for a signal with the tools and layout to communicate systems to a design team. Let’s take a look at this unified design tool, Multi-board Assembly, and how it simplifies the processing of putting all the pieces of your multi-board design together.

Multi-board Design with Multi-board Assembly

If your organization works on complex PCB designs that are comprised of multiple circuits, each of which may have its own board, then you engage in multi-board design. The problem is that most PCB design software packages do not target this as a priority. Therefore, you may find yourself frustrated and your projects requiring more time than you would like or have to complete. Fortunately, the Multi-board Assembly functionality of Altium Designer 18, was developed with you in mind.

 

Multi-board Assembly overview

Fig. 1 Multi-board design with Multi-board Assembly

 

In Fig. 1, above, a multi-board assembly design is shown along with a listing of the “parts” it contains. In Altium Designer 18, multi-board assemblies are denoted by *.MbaDoc and its contents are referred to as parts. The Multiboard Assembly panel, shown at right in the figure, provides a listing of the parts, which typically are the boards (*.PcbDoc files; including component listings) and case designs in the form of *.step files. Once a MbaDoc has been created, you enjoy much the same capability that you have with a single *.PcbDoc.

Creating a multi-board design

A multi-board design may be created in the following ways:  

 

  • From a single schematic

Normally, a single schematic is compiled into a single PCB, a simple step-by-step procedure. It is also possible to segment a schematic into sub-circuits that may then be separately compiled into multiple PCBs. The preferred way to do this is to first create multiple schematics.

  • From multiple schematics

Schematics may be created in levels, wherein a top level schematic may contain multiple lower level schematics. This design is helpful to simplify a design as well as to allow for large complicated designs that may span several pages to be constrained within a smaller single page working environment. Another way to work with schematics that span several pages or contain several definable sub-circuits is to create separate schematics for each page. These in turn may be compiled into multiple PCBs.

  • From multiple PCBs

The easiest way to create a multi-board design is to create a multi-board project (*.PrjMbd) and simply add existing PCBs.

Adding to a multi-board design

Like other projects, multi-board projects may be accessed from the File menu at the top left of the main window or from the Panels tab in the lower right corner. The Multiboard Assembly panel has three icons for adding to your multi-board project. From left to right:

  • Adding multi-board designs

Adding multi-board designs

Fig. 2 Adding multi-board designs

 

  • Adding PCBs

Adding PCBs

Fig. 3 Adding PCBs

 

  • Adding cases

Adding Cases

Fig. 4 Adding Cases

 

Working with workspaces

Altium Designer 18 is an integrated unified PCB design and development software environment, where designers can simultaneously access schematics, PCBs and BOMs. This capability allows you to highlight and access portions of your multi-board design from the project structure listing as shown in Fig. 5.

 

Highlighting from MBA File Structure

Fig. 5 Highlighting from MBA File Structure

 

Or from the design itself, as shown in Fig. 6.

 

Highlighting from MbaDoc

Fig. 6 Highlighting from MbaDoc

 

Multi-board Design with Multiple Users

Whether based upon expertise or to facilitate efficient PCB design and development there are times when multiple designers work on different aspects of a single design. The multi-design environment in Altium Designer 18 promotes this collaboration. One capability that exhibits this is the ability to hide

 

Hidden Case Top

Fig. 7 Hidden Case Top

 

and make visible certain portions of the multi-board design, as shown in Figs. 7 and 8, respectively.

 

Visible Case Top

Fig. 8 Visible Case Top

 

This visibility can be extended down to individual components on specific boards.

 

By far, the best tool available for putting together all the pieces of a PCB product is Altium Designer 18. Altium Designer 18, is the most comprehensive PCB design and development software package in the industry. One example of the advanced capabilities available is the multi-board design functionality, which gives you the ability to design PCBs to any degree of complexity by combining multiple boards. Moreover, you can add case structures to form complete product designs.

 

If you or your organization would like to explore Altium Designer 18 and sample the functionality and capabilities, take a test drive Altium Designer with a free trial.

 

For more information on how you can create a multi-board design in Altium Designer 18, talk with an Altium PCB design expert.

 

About the Author

Altium Designer

PCB Design Tools for Electronics Design and DFM. Information for EDA Leaders.

Visit Website More Content by Altium Designer
Previous Article
Board Shape Management in 3D Modeling Software
Board Shape Management in 3D Modeling Software

It’s time to reclaim your productivity. Altium Designer makes board shape management and reuse simple and i...

Next Article
Ceramic vs. FR4 Multilayer PCBs: When to Use Either and How
Ceramic vs. FR4 Multilayer PCBs: When to Use Either and How

Using a ceramic for your next multilayer PCB improves thermal and mechanical reliability.