I once asked a family member to borrow some money to use as a down payment. His response included a counter-proposal that I didn’t understand, so I let it pass. Unfortunately, by not understanding his answer to my request, I missed out on an even better opportunity than what I had initially asked for.
That exchange has stayed in my mind as an example of how important clear communication is. In our world of PCB design the need for clear communication is essential, especially when requesting new for a design. Yet these requests can get garbled, delayed or even lost when the part request documentation fails to be distributed properly. Engineers can also requests that are not available or are from suppliers that are not on the approved vendor list. All of these problems can result in costly redesigns and slow down manufacturing. Fortunately, there are bill of materials inventory management tools available that can help you solve part request problems.
The traditional method of submitting a new part request
have been requested by design teams for as long as printed circuit boards have been designed. As a PCB design is developed, are added to the schematic and connected together to complete the circuitry. If the design requires a new part that has not been used before, the following steps are usually taken:
The engineering team researches part vendors to find the part that they need.
Once the part is found, engineering submits a new part request in the form of a spreadsheet, E-mail, or a paper document to the purchasing and CAD departments.
Purchasing researches the part for cost and availability and assign a company part number to it.
The CAD department uses part data gathered by engineering to develop preliminary for schematic and layout.
Upon confirmation of availability, the approved part request is sent back to engineering.
, schematics, and layout are all updated with the approved part information.
There are many steps in this process, any one of which can cause problems with the part request.
Problems with the traditional part request system
Problems associated with the traditional part request system
There are a number of problems that can arise with the traditional method of requesting . Two of the worst of these problems are requesting new from unapproved vendors, and requesting that are unavailable for purchase.
In order to find the exact part that they need, engineering may look at part suppliers that are not qualified as an approved vendor for the company. Even though the requested part is the perfect solution for the design, the part vendor itself may not be acceptable for business reasons that are not obvious to engineering. Also, a new part may be offered by an approved vendor, but it may not be available for use yet, or it may not be available in the quantities required to support your manufacturing needs.
Qualifying a new vendor or finding a substitute to replace unavailable takes time. The design may have progressed to the point where a redesign to accommodate a new replacement part will seriously impact the design schedule.
Another problem that can occur is a failure in the distribution of the part request documentation. This can happen because:
1) Part requests on paper can get accidentally lost or destroyed. We used to laugh at the old excuse of “the dog ate my homework”, but the reality of missing paperwork is just not that funny.
2) Documentation personnel that are absent from the office can cause delays in the creation or delivery of part requests.
3) Incorrectly addressed documents or Emails can cause a part request to end up in the wrong location.
4) Part request files can get lost due to network or hardware mismanagement.
Anyone of these issues can derail a traditional part request system. This causes the CAD department to be late in finalizing the part, which adds delays to finishing the design in engineering. All of these delays can continue to snowball downhill until finally the manufacturing department is affected causing the product delivery date to slip.
Part requests using a bill of material inventory management system
Making part requests through a bill of materials inventory management system
The problems in a traditional request system are no longer an issue with the part request functions of a bill of materials inventory management system.
Engineering and purchasing part research is tied together: Your engineers will be able to work together with your purchasing agents to immediately start a new vendor qualification process. Additionally, your engineering will have real-time access to approved vendor and lists to know which vendors are qualified and which are available for use.
Distribution of part requests is all contained within the bill of materials inventory management system: The aggravation from delayed or lost part request documentation will no longer be a problem in your design cycle. All personnel will have access to the part requests through the inventory management system. This will allow them to work as soon as a part request is filed instead of waiting for documentation to be distributed.
Part data is immediately available to all personnel: Your engineering, CAD, and manufacturing departments will all have real-time access to all part request data sheets. This will allow all personnel to work with confirmed vendor part data eliminating the need for temporary or “preliminary” that require updating later on.
There are a lot of problems that can arise from using the traditional method of requesting new for a PCB design. Engineering may not know that the that they are requesting are not available for purchase, or that the part supplier may not be accepted as an approved company vendor. Then, the part requests themselves may get delayed or lost depending on how they are distributed to different departments. All of these problems can be resolved by using the online request functions of a bill of materials inventory management system.
Bill of materials inventory management tools can help improve interdepartmental communication during the design cycle. By taking the problems out of the traditional method of requesting new , your design team members can focus on design rather than managing documentation. Altium ’s management tools can help you with this. Find out more information by talking to an expert at Altium.
About the AuthorVisit Website More Content by Altium Designer