Aug 17, 2021 ... Series Conclusion · UART is quite a simple asynchronous serial communication, which allows full-duplex mode. · I2C is probably my favorite ...

Apr 13, 2021 ... Serial communication pins in microcontrollers can overlap, so read datasheets carefullyYou need to download and use the appropriate IC ...

Aug 16, 2021 ... LIN may be used as a sub-bus connected to a CAN bus. The CAN bus sends a signal to one of its nodes, which can itself be a LIN master. When the ...

May 5, 2021 ... RS-485 is a successor to the RS-422, which also uses a balanced differential pair, but only allows one driver per system. The RS-485 protocol ...

Apr 14, 2021 ... The communication principle of RS-232 communications is simple. The sender device stores data in its buffer and then sends the data through the ...

May 24, 2021 ... I²C (pronounced I-squared-C) stands for Inter-Integrated Circuit. In a nutshell, it's a single-ended, synchronous, multi-master, multi-slave, ...

Apr 14, 2021 ... UART stands for Universal Asynchronous Receiver Transmitter. This communication system requires two pins, except for the ground. One is labeled ...

May 24, 2021 ... 1-Wire protocol. 1-Wire is a low-speed communication bus developed by Dallas Semiconductor Corp. (now Maxim Integrated) that uses one signal ...

Sep 29, 2017 ... Unless it is a broadcast message, each transmission data packet must be replied by the receiver with a (positive) acknowledgement (ACK) or ...

May 24, 2021 ... SPI stands for Serial Peripheral Interface. It is a serial communication bus commonly used for short-distance communications between ...