작성자 정보

Francesco Poderico

전자 분야에서 25년 넘게 근무 중인 Francesco는 업계 전문가로 널리 인정받고 있습니다. Francesco는 전자 설계, 펌웨어 개발 및 PCB 레이아웃 엔지니어링 등의 서비스를 제공하고 있으며, EMI/EMC 전문가로서 EMC를 통과시키는 데 어려움을 겪고 있는 회사를 돕고 있습니다. 이러한 접근 방식 덕분에 Francesco는 이전에 EMC에 실패한 많은 회사에 효과적인 솔루션을 제공할 수 있었습니다. Francesco에게 직접 연락하려면 francesco@neutronix.co.uk로 이메일을 보내세요.

최신 콘텐츠

Advanced Electronics: Understanding Design Challenges For Space Applications Part 2 In the previous article we saw that when a particle that hits a BJT with enough energy, part of this energy may get absorbed by the component and may create unwanted current between the emitter and the collector. If this issue is neglected, we may have some malfunctions. This phenomenon is called SEE (Single Event Effect). It is the responsibility of the designer to design the board in a way that will be SEE tolerant. As I wrote in the previous 문서 읽기

Advanced Electronics: Understanding Design Challenges for Space Applications Part 1 Electronics design for space applications is a subject I’ve always been passionate about, and understanding the reasons particles can damage circuitry has always fascinated me. In this article, we’ll discuss how a Beta or Gamma particle can create—for a short period of time (usually referred as SEE or Single Event Effect)—a large current in your design which could lead to permanent damage if ignored. We’ll discuss a technique I have used in my 문서 읽기

Understand the AC and DC Return Path on a High-Performance Mixed-Signal PCB High performance mixed-signal PCBs are difficult to design. Proper grounding and routing are essential to ensure accurate ADC conversion. In this article we’ll discuss a complex topic; the importance of designing a controlled current path on high performance mixed (Analog/Digital) PCBs, and how this impacts the performance of your board. What are we going to learn? • Loop currents follow different path (depends from their frequency range.) • How 문서 읽기

How To Design the Perfect PCB Stack Up With Altium Designer In the last 20+ years, electronics have become increasingly more complex. Board density is always being pushed to the limits, EMC/EMI regulations evolved and got stricter, and edge rates have become smaller. Therefore, the PCB Layout engineer needs a good understanding of EMC, PDN, EMI, and SI in order to route a modern PCB with confidence. In this article we’ll talk about some of the considerations we should have in order to create a PCB stackup 문서 읽기