Impedance Calculations for Transmissions Lines!

manager

| Created: March 3, 2020 | Updated: March 19, 2020

About Author

About Author

More content by manager

Recent Articles

How Important is your Microcontroller Clock Source

How Important is your Microcontroller Clock Source The type of clock signal you need to use for your microcontroller will depend mainly on the nature of the device it’s embedded in and its operating environment. Read Article

MMw and RF Interaction

MMw and RF Interaction John will generously share with us today a glimpse of his recent keynote presentation at PCB West 2021. Watch now, and don't miss this rare opportunity to learn from expert John Coonrod. Read Article

copper pour and via stitching

Copper Pour and Via Stitching: Do You Need Them in a PCB Layout? When is it appropriate to use copper pour or via stitching in your PCB layout? Read our guide on copper pour and how it can be used properly with via stitching. Read Article

PCB Design and Review Checklist

PCB Design and Review Checklist It’s essential to check a board for issues before production or prototyping. Here’s an extensive checklist you can adapt or use directly for reviewing each board design. Read Article

1 oz copper weight

Do You Always Need 1 oz. Copper Thickness on Each Layer? 1 oz. copper thickness is often seen as a standard thickness value used in many designs. Here’s when you might need thicker copper on every layer. Read Article

Getting Started with ESP8266

Getting Started with ESP8266 A project overview on getting started with the ESP8266 device. Expert Ari Mahpour reviews the benefits of using a device such as the NodeMCU board from HiLetgo and how to get up and running with a few examples. Read Article

Getting Started with MQTT

Getting Started with MQTT Check this out. This is a new project overview demonstrating MQTT by expert Ari Mahpour. In this article, Ari answers the What and Why of MQTT, and gives guidelines to get your project started. Read Article

SAP (Semi-additive PCB process): The Basics

SAP (Semi-additive PCB process): The Basics Expert Tara Dunn answers what are semi-additive PCB fabrication processes and what are the benefits? Read now and learn more about SAP. Read Article

2-layer PCB Routing

Can You Route Digital Signals on a 2-layer PCB? 2-layer PCBs are a common entry-level choice for designers, and they can even support high speed designs if built correctly. Read Article

Deterministic Solutions to Solve Skew Problems

Deterministic Solutions to Solve Skew Problems Avoid getting your design "skewed"! Today's guest is Z-Zero's Founder and CEO, Bill Hargin. Together we will dive into the cause of getting skews in your board. Watch now to get answers to your "skews" questions. Read Article

Back to Home