Altium Experts

Andreas Schilpp gained his engineering degree in Applied Physics at University Heilbronn. He gathered practical experience as development engineer in semiconductor industry and as application engineer and laboratory manager in process control technology. In 1994 he started working for Würth Elektronik CBT as a product manager. He managed a lot of

Casper van Doorne is an independent electronics expert with 20+ years of experience in the development of electronics. With his company Doofenshmirtz Evil Inc. he delivers consultancy, interim management and development of electronics. Among his customers are Altium, Applicos, Becton Dickinson, Stoneridge Orlaco, TIMIO and Tricas Industrial Design

Dr. Despina Moschou (MEng, PhD) is a Lecturer and 50th anniversary Prize Fellow in Bioelectronics, within the Centre for Biosensors, Bioelectronics and Biodevices (C3Bio), Department of Electronic & Electrical Engineering at the University of Bath. Since 2010, her main research focus has been to apply her microfabrication and microelectronic device

Rainer Beerhalter is a freelance senior design engineer who has been in PCB design since 1994. Owning a Germany based company, "b gmbh medien und datenbanken", his team created many designs and products in medical, IT, automotive and scientific applications. For many years he has been active in LED display design, improving the performance and EMC

Richard is CEO at Xitex Limited, which provides consultancy on defining and launching wired and wireless connected products, with emphasis on creating secure IoT products and their associated supply chains. He has spent over 30 years in the electronics and communications sectors, having worked for Lucent Technologies, Sony, Cisco and also being a

Since 1995 Rik Doorneweert has helped and advised HW design teams and test engineering teams around the globe, adding Boundary scan tools or services from JTAG Technologies to their boards and system designs, thus improving their Design for Manufacturing and test processes. This helped the HW engineers to validate their prototypes without firmware

Robert Even is Product Marketing and Business Development Manager at Nano Dimension, driving the penetration of additive manufacturing for 3D printed electronics. He has presented at conferences and Open Houses around the world, including EIPC, IDTechEx and TCT on applications of multi-material additive manufacturing for electronics and their

Shalom-Shlomi Zigdon, founder and CEO of iTech-iCollege Academy for PCB & Board Design, has 40 years of experience in electronics engineering. For the past 20 years, he has been a lecturer for high-speed board design, signal integrity and EMC for R&D teams in the USA and Europe. As a consultant, he helps engineers advance to the highest data rates

Willem is an electrical engineer with a software background. He has been involved in various products related to HDL design, FPGA and PCB. His expertise is in software product development and translating customer requests into product functionality.

Mr. Bot is a Certified Reliability Engineer from American Society for Quality Control (ASQC) 1982 and Electronic Engineering from Tel-Aviv University (1977-1981). Mr. Bot has more than 25 years of experience in Reliability, Availability, Maintainability and Safety (RAMS) and Integrated Logistic Support (ILS). He was the RAMS/ILS manager of many

With over 30 years of extensive experience in PCB and Package design, training and Signal integrity analysis using state of the art tool sets, including Expedition, CES (Constraint Editor System), Altium, Hyperlynx, Interconnectix (ICX), Power SI, Boardstation RE/XE and Allegro v16.x including CMS (Constraint Management System). John has expertise

Barbara, widely known as "The Cleaning Lady", is an expert and trusted adviser in critical cleaning. Critical cleaning is soil removal where, if you don’t do it, product quality suffers. Her manufacturing activities encompass optics fabrication as well as assembly of aerospace components, medical devices, advanced automotive, additive manufacturing

Diego Petracca leads the hardware development team in Toradex AG, a global company founded in Switzerland. Toradex offers Arm® System on Modules (SoMs) and focuses on the ease of handling highly reliable embedded systems. Mr. Petracca holds a Bachelor of Science degree in Electronic Engineering and a Master of Science degree in Mechatronic

Aljaž is an electronics engineer whose professional background spans hardware design, multilayer PCB design, mechanical engineering, and 3D printing and prototyping. He refined his knowledge while working in multiple industries and markets on products for data encryption devices, dental testing and repair equipment, and embedded software and

I work where advanced Technology and Business intersect, putting them together in the right manner to make them greater than the sum of their parts. I also invent and make machines. I like meeting people and making deals. I prefer working with startups or as a part of a small, dedicated team in a big company. I like to think that if you can't scale

With a Master's degree in Electronics and Communication Engineering, specialising in Microwave and RF Engineering, Amit brings a wealth of technical expertise to the table. He embarked on his journey with Altium in 2020 as a Field Application Engineer. In this role, he is entrusted with driving business growth by supporting new logo acquisitions

Having spent more than 25 years working in the electronic field, Francesco is widely recognized as an industry expert. The services that he provides include electronic design, firmware development and PCB layout engineering. Additionally, he is an expert in EMI/EMC and helps companies that are having trouble passing EMC. As a result of his approach