Podcast | PCB Design Resources

JITX, a Way for Hardware Engineers to Write Codes 40 min OnTrack

Duncan Haldane, the CEO, and co-founder of JITX joins us to share a very interesting approach to PCB design. JITX is a way for hardware engineers to write code to design circuit boards.

EMC on the Board and Off the Board 37 min OnTrack

We are very delighted to have Min Zhang in this episode. Min is an independent EMC consultant based in the UK. Today, we'll be talking about EMC, both on board and off the board. It will be a very interesting discussion because we will look a little bit deeper at the system level.

Electronics Manufacturability and Reliability with QA Guru Cheryl Tulkoff 43 min OnTrack

In this episode Cheryl and I will talk about risk assessment, planning for not only success but also failure, and understanding the difference between quality and reliability. Watch through the end, and make sure to check the additional resources below.

Supply Chain Strategy for PCB Designer 48 min OnTrack

Supply chain management expert Chris Cain shares his 37 years of experience and strategies to overcome electronic part shortages.

Streamlining Product Development Process for Successful Launch 31 min OnTrack

Ben and Connor of Aptus Design Works shares some great advice for both designers and companies to streamline their product development process from prototyping to manufacturing.

Pros and Cons of Advanced Electronic Packaging for PCB Designers 28 min OnTrack

Our guest Phil Marcoux is very well-known in the advanced electronic packaging community and currently working as a business mentor in the electronics industry. Today we will tackle the pros and cons of heterogeneous electronic assemblies and what we can do as an industry to move forward with it.

Cutting Edge Technology in Packaging with an Interposer 43 min OnTrack

In this episode, our guest Joe Dickson, tells us about the cutting-edge technology implemented in advanced packaging at Wus Printed Circuit International.