Depending on your relationship with Altium, the services offered on the Altium Platform will be experienced from within Altium Designer and through the platform's browser-based interface. This page takes a look at the latter and provides an overview of what you'll see when you register an Altium Account and sign in to the Altium Platform Interface. For the latest information on the security,…

Requirements Portal is under continuous development. This page outlines new features and enhancements made to Requirements Portal in key updates. When the Sharing of Requirements Projects feature is released: remove the box below, leave the content. Update - xx October 2026 Sharing of Requirements Projects Requirements projects are now shown on the Projects page of the Workspace browser interface…

Agentic Requirements Engineering in Requirements Portal introduces AI agents that work directly with requirements data, transforming requirements from static documentation into a living, shared engineering model. Rather than forcing engineers to spend time on administrative tasks, Requirements Portal allows AI to answer project-specific questions, propose requirement updates, perform quality…

The goal of this tutorial is to cover the most basic functionalities of Requirements Portal. In this tutorial, we will design a table fan with a set of requirements and blocks and then perform a mass budget analysis and dynamic analyses for user interaction. We will also develop a quality testing procedure. Valifan The Valifan has some requirements that should be considered throughout the design…

Use of this CoDesigner documentation requires: A supported Altium design client: Note that not all features described on this page are available in all installations of Altium MCAD CoDesigner. Refer to the Feature Availability panel on the right for more information. To determine the supported Altium design clients, note the version of the MCAD CoDesigner Addin you are using, then check for…

Requirements Portal is an advanced engineering management tool used to ensure specification and performance compliance during system design development. When enabled for your Altium 365 Workspace, Requirements Portal integrates with your PCB design projects through the exchange of design data and formalized Requirements instances. The system requirements, as created in Requirements Portal, can be…

Altium’s requirements management and Verifications & Validations capabilities are purpose-built for electronics teams. Available in an Altium 365 Workspace created as part of the Altium Develop, Altium Agile Teams, or Altium Agile Enterprise solution, they replace scattered spreadsheets with a collaborative, versioned and traceable environment that integrates directly with your design and…

Altium's MCAD CoDesigner technology connects the mechanical and electrical design domains, allowing the mechanical and electronic engineers to pass the loaded PCB back and forth between the two domains. In your Altium design software, this is achieved through an extension that loads and extracts board and component data from the PCB editor, the MCAD CoDesigner extension. In the MCAD software the…

An Altium 365 Workspace is a dedicated server for your managed content. Hosted on the Altium platform, it facilitates the connectivity of the design, manufacturing and supply domains, and the mechanics for moving data between them. To be able to activate and use a Workspace for your company, you need to be registered with an Altium Account and have a purchased level of Altium product access –…

How MCAD CoDesigner supports Harness Design MCAD CoDesigner’s Harness support integrates the ECAD and MCAD models of the harness. The goal is to allow the harness geometry to be designed in MCAD and then transferred back to ECAD, as the physical parameters (lengths) of the harness elements. The common (and essentially similar) element between the ECAD and MCAD environments is that the schematic…