Sign In

작성자 정보

Sainesh Solanki

사이네시 솔랑키는 디지털, 아날로그, RF 등 다양한 설계를 지원하는 11년 이상의 경험을 가진 하드웨어 엔지니어입니다. 사이네시는 전자 설계의 프로젝트 관리에 참여하는 것에 열정을 가지고 있으며, 우리의 삶을 풍요롭게 하고 세상을 더 좋은 곳으로 만든 모든 고급 하드웨어에 매료되어 있습니다.

최신 콘텐츠

How to use Schematic CAD Drawings for Cable Assemblies: Part 4

How to use Schematic CAD for Harness Drawings and Cable Assemblies: Part 4 Sainesh Solanki continues his blog series on using Schematic CAD tools for cable and wiring harness design. In this 4th installment, Sainesh discusses how to clearly lay out the cable assembly drawing on the schematic page, along with the electrical schematic for generating a netlist for testing and DRC later on. Read on to find out how you can be using schematic CAD drawings for cable assemblies. Doing the cable assembly drawing in a Printed 문서 읽기

How to use Schematic CAD Drawings for Cable Assemblies: Part 2

How to use Schematic CAD Drawings for Cable Assemblies: Part 2 The need to design cable assembly drawings often falls to the electronics design team, but for many, the use of high-cost dedicated cabling design software is simply out of reach and overkill. In this second installment of the cable design blog series, Sainesh Solanki reveals the needed design elements of the components used in great cable assembly drawings (you can access part 1 here). These schematic symbols and their associated parameters and 문서 읽기

How to use Schematic CAD Drawings for Cable Assemblies: Part 1

How to use Schematic CAD Drawings for Cable Assemblies: Part 1 The need for computer-aided cable assembly drawings often falls to the electronics design team, but for many, the use of high-cost dedicated cable design software is simply out of reach and overkill. The solution? Use the Schematic Editor! Most electronic engineers work on products that require Printed Circuit Board designs to be interconnected by cable assemblies. As you might have already noticed, some dedicated tools that primarily focus on 문서 읽기

How to use Schematic CAD Drawings for Cable Assemblies: Part 3

How to use Schematic CAD Drawings for Cable Assemblies: Part 3 The long-anticipated part 3 in Sainesh Solanki's Cable and Harness Design blog series is here! This installment continues the establishment of libraries with connector heads and crimp lugs, as well as how to model heat shrinks. We introduce some parameters too, which enable wire-to-crimp compatibility checks. You can access part 2 here, but if you're all caught up, read on! Creating Components Continued... Two additional schematic symbols can be 문서 읽기