Come see Altium at Embedded World, Booth 4-305, and discover our industry-leading suite of solutions!

Pros and Cons of Having a Manufacturer Source Components for Your PCB Design

Zachariah Peterson
|  Created: March 22, 2017  |  Updated: October 29, 2023
Pros and Cons of Having a Manufacturer Source Components for Your PCB Design

When it comes time to manufacture your PCBs, the boards will end up in assembly and parts will need to be sourced for the upcoming build. Of course, you’ll procure parts from distributors or directly from component manufacturers. Someone has to take responsibility for these purchases, and designers often see it as their responsibility to take ownership of sourcing.

It is generally a good idea for a designer to be aware of where their components can be purchased. At minimum, this avoids an inventory disruption. But there are two instances where the designer may not be responsible for handling sourcing or directing a buyer in their company to make purchases:

  • Turnkey manufacturing and assembly with prototypes or low volume
  • Scaling to moderate volume production with an EMS provider

There are some advantages and disadvantages to allowing either type of company to source your components for you. Here's what you should consider.

The Difference Between Consignment Versus Turnkey

PCB assembly companies can provide sourcing and receive inventory under two models: consignment and turnkey. Under the consignment model, the customer is responsible for sourcing their own components and coordinating on-time delivery to the assembly facility. That means the customer incurs the cost, takes time to look through distributor inventories, place orders, select shipping times, and finds replacements when a desired part is out of stock. If parts kits arrive late at the assembly facility, then the customer is responsible for any schedule delays.

Manufacturers will also procure parts for assembly under a turnkey model. This is usually a service level where the manufacturer provides everything needed to get a completed assembly to a customer:

  • Fabricated and tested PCBs
  • Soldered and cleaned PCBAs
  • Spare parts and assemblies in packaging

The idea behind turnkey manufacturing is that the customer does not have to deal with any of the logistics or management needed to coordinate the manufacturing order, including parts purchases. They get to sit back and sip coffee while the staff at the manufacturer does all the leg work.

PCB assembly line

So obviously, there should be some risks associated with going completely hands off and selecting turnkey production. Peace of mind always comes with a trade-off, whether it's cost or risk that the assembly ends up being incorrect.

Risks of Consignment

If you're a fan of consignment, then you're probably a control freak or you are ultra budget-conscious. With consigned sourcing, you are in total control of the parts that are being procured and where they are procured, as well as shipping timelines and the costs associated with all of the above.

This is also faster if parts are out of stock when ordering: you won't have to wait for emails back and forth from the manufacturer inquiring about replacement approvals. Instead, you can leverage your sourcing tools or parts recommendations on distributor sites to quickly select replacements. Whenever replacements are selected during purchasing, make sure you document these replacements in a copy of your BOM and send an update to the assembler.

The biggest risk of consignment is delays in your schedule. Having to take time to create orders, coordinate shipping, track packaging, select replacements, and supply updated BOMs to the assembler all takes time. If you’re cavalier about scheduling, then you just might miss your ship date.

Risks of Turnkey

Turnkey sourcing is for the engineer who does not have the time or inclination to manage all the purchasing decisions. The benefit to you as an engineer is that the assembler will coordinate all the orders for your parts and their shipping dates tend to be much more reliable. Unfortunately, convenience comes at a price, and the word “price” here is being used literally. There are multiple risks that ultimately create a financial risk for your product:

  • Assemblers might apply a markup to your parts costs, and with some assemblers that markup can be up to 100%
  • Overseas assemblers might change your BOM and not tell you about it, and don't expect to see any cost savings passed on to you
  • You don't always know where the parts are being purchased; the assembler might be purchasing from a shady gray market broker
  • Assemblers always over-purchase to account for attrition, but in turnkey they may not ship you those extra parts, but you will still foot the bill for attrition

Given these potential problems, you might be better off consigning parts yourself, especially if you're planning to produce overseas. Eating the extra shipping costs is worth eliminating the risk of counterfeits in your assemblies.

Is There a Middle Ground?

There definitely is a middle ground between turnkey and consignment. What I prefer is to procure the most important parts myself once they are locked into the BOM. The remaining components, which are very low risk and have many replacements, can be sourced by the assembler.

Some assembly houses have online platforms that allow you to select which parts you will consign and which the assembler can order. At that point, any markup can be minimal as the most expensive and most important parts have already been procured by you, and the savings more than offsets the shipping cost.

Sourcing Approach

Pros and Cons

Consignment

  • You procure everything so you control costs
  • Required to coordinate shipping
  • Major risk is production delays from incomplete kits

Turnkey

  • Manufacturer procures everything
  • You lose visibility and create sourcing risks
  • You can still consign the most important parts

When you go to high volume, you will most likely be obtaining from the component manufacturer directly, especially for your most important parts. In that case, you will have no choice but to work with your EMS company under a mixed model. With scale comes additional attention to sourcing location and logistics, so make sure you have tracking processes in place before you go this route.

Thankfully, you don’t have to guess at the sources for your components when you use the ActiveBOM feature and supply chain tools in Altium Designer®. To implement collaboration in today’s cross-disciplinary environment, innovative companies are using the Altium 365 platform to easily share design data and put projects into manufacturing.

We have only scratched the surface of what’s possible with Altium Designer on Altium 365. Start your free trial of Altium Designer + Altium 365 today.

About Author

About Author

Zachariah Peterson has an extensive technical background in academia and industry. He currently provides research, design, and marketing services to companies in the electronics industry. Prior to working in the PCB industry, he taught at Portland State University and conducted research on random laser theory, materials, and stability. His background in scientific research spans topics in nanoparticle lasers, electronic and optoelectronic semiconductor devices, environmental sensors, and stochastics. His work has been published in over a dozen peer-reviewed journals and conference proceedings, and he has written 2500+ technical articles on PCB design for a number of companies. He is a member of IEEE Photonics Society, IEEE Electronics Packaging Society, American Physical Society, and the Printed Circuit Engineering Association (PCEA). He previously served as a voting member on the INCITS Quantum Computing Technical Advisory Committee working on technical standards for quantum electronics, and he currently serves on the IEEE P3186 Working Group focused on Port Interface Representing Photonic Signals Using SPICE-class Circuit Simulators.

Related Resources

Related Technical Documentation

Back to Home
Thank you, you are now subscribed to updates.