Vergleiche von Schaltplänen und Layouts erleichtern

This page looks at the Situs Topological Autorouter, an integral part of the PCB Editor. It uses advanced topological mapping to define the routing path, then calls on a variety of routing algorithms to convert this human-like path to a high-quality route

Explore Altium Designer 24 technical documentation for Component Placement and Routing the Board and related features.

Explore Altium Designer 24 technical documentation for Fanout & Escape Routes and related features.

Explore Altium Designer 24 technical documentation for Strategies for Selecting the Routing and related features.

This page looks at the Glossing and Retrace features in the PCB Editor. Where Glossing attempts to shorten the overall route length and reduce the number of corners, Retrace re-applies the preferred width and clearance requirements to an existing route

This page presents a full listing of the release notes for each beta release of Altium Designer

This page provides an in-depth look at the ActiveRoute Guided Interactive Router - a key tool when routing your PCB that enables you to quickly produce high-quality results, that meet the design rules, all the while under your full control

This page provides an in-depth look at the process of interactively routing a single net, and the settings that control that process

This page acts as a checklist to help you work out if your board is ready for routing, including how to find nets on the board, making sure relevant design rules are defined, and setting up the routing layers

This page looks at the PCB Editor's support for differential pair routing - a design technique employed to create a balanced transmission system able to carry differential (equal and opposite) signals across a printed circuit board