Add Any Component to Your Design With Unified Component Libraries

March 21, 2018 Altium Designer

 Updating Libraries in Altium

When embarking on the PCB design journey, there are some initial hurdles you’ll need to overcome in order to get your design process running smoothly and without interruption. Sometimes the hurdle is as manageable as making sure you get your coffee in the morning. Sometimes the hurdle is as tall as not having the knowledge, comfort, or software you need to accomplish your design tasks.

Often times, when sketching out an initial PCB design, there will be some components which are loosely defined and allow for variability. This is great for broad PCB designs, however, when the time comes for locking in a specific part number, whether it be a specific supplier that you have great relations with or a certain function that cannot be varied in any way, how are you to incorporate it into your design with confidence that your software’s will hold it?

 

Problems Faced  Within Databases

Sadly, many programs out there only offer a that is created and managed in-house. This allows for very little in the way of part selection as you are bound to what they have entered-in on-hand. Sure, you might be able to enter in your own part parameters to the design, however, this will take loads of time and, frankly, is a tedious task to accomplish for each ‘new’ part you select.

Don’t be bound by these frozen part libraries! Altium’s Unified Component Libraries make it quick and painless to search through thousands and thousands of components by a plethora of suppliers instantly to get you the specific you are looking for.

 

Altium’s Solution to Databases

Below, we’ll walk you through the design process that I like to use when I need a new part that isn’t already listed in Altium’s general part database.

First, we’ll start by assuming that you’ve selected a specific OpAmp for your upcoming PCB design project. Let’s say its the LM386.

Upon opening up Altium Designer® , and after you’ve created a new schematic project, you navigate to the libraries tab on the right-hand side of the screen:

New Project in Altium with Libraries tab open

Opened libraries tab in Altium

Selecting then, from the dropdown menu, the schematic you wish to search (let’s say you are starting out fresh with the initially given libraries of Miscellaneous Devices, and Miscellaneous Connectors), you enter your LM386 part query. Nothing to show:

Empty search query in Altium

Searching for a part within Altium’s Libraries

At this point, folks might just throw up their hands and press that big red X in the upper right corner, but not you.

Instead, you open up your web browser and navigate to the Unified Component within Altium’s Design Content center.

Now, again, entering your needed part number of LM386 in the search bar, you now see that there are, in fact, two-part libraries containing your part! Look at you go!

Example of search result in Altium design content

Altium design content

We’ll then again assume that you have a special affinity to Texas Instruments’ (I know I do), and want to continue with them.

Simply click to open up their to see all their listed within this single (as there are many TI specific libraries), and you should be able to find the searched part highlighted in yellow.

Further expansion of part results list in part

Searching the list of available

Notice how many are available in this one ? Many to choose from for your specific needs.

From here, we’ll go ahead and click the ‘Download ’ button which gives us a zipped file to work with. Unzip this file to any folder you enjoy using. Opening back up Altium Designers’ program, and back into the libraries right-hand panel, click on the ‘Libraries’ button in the upper section of the pane. This opens up the Available Libraries window.

Under the ‘Projects’ tab, click the ‘Add ’ button. Navigate to the Texas Instruments schematic you just downloaded and click ‘Open’.

Congrats! You’ve now successfully added the entire Texas Instruments (Linear and Special Function) to your PCB project.

Entering in, again, your LM386 part number query (under the TI ), you now have a few options to choose from.

Altium   search with imported

search function with uploaded information

You are now free to do what you will with the that you want. This is just one specific example of how I like to grab specific from Altium’s Unified Component when I am set on a certain component.

There may come a time, however, where the you want are not within the Altium Unified Component . If there are no other workarounds for selecting other , you can request a part to be created in less than 24 hours which is not a bad secondary solution to the issue.

By simply clicking ‘Request a Part’ from the libraries window, you will be sent to EE Concierge™, whereby sending a simple manufacturing datasheet and part number, they will have your part ready for use in Altium in less than 24 hours.

Screenshot of Altium’s EE  service

Further component creation help from Altium

 

Whatever the Case, Altium Has You Covered

No matter the case in your search for the perfect part for your perfect design, utilizing Altium’s vast network of part offerings can get you the exact you require instantly (or within 24 hours).

For more in-depth understandings of component libraries within Altium , consult their extensive documentation pages, some of which found below:

Check out the Unified Component Library to search for your perfect part, or to discuss more part library capabilities, talk to an Altium expert today.

About the Author

Altium Designer

PCB Design Tools for Electronics Design and DFM. Information for EDA Leaders.

Visit Website More Content by Altium Designer
Previous Article
Enable Temperature and Humidity Analysis with a Humidity Sensor Circuit Design
Enable Temperature and Humidity Analysis with a Humidity Sensor Circuit Design

If you’re looking to design a sensor for temperature and humidity data tracking and analysis, consider thes...

Next Article
Industrial Air Dryer Designs Demand a Keen Eye for Safety
Industrial Air Dryer Designs Demand a Keen Eye for Safety

Especially for industrial air dryers, designing hardware for dryer controllers needs you to understand the ...

×

Trade In Your Outdated Design Tool & Unlock 40% Off Altium Designer. Sign up and an Altium representative will be in contact shortly.

First Name
Last Name
Company Name
Phone Number
Country
State
Postal Code
Acknowledging Altium’s Privacy Policy, I consent that Altium processes my Personal Data to send me communications, including for marketing purposes, via email and to contact me by phone.
!
Thank you!
Error - something went wrong!