Meshing Design with Assembly

May 17, 2019 Barbara Kanegsberg

You have probably heard the remarks. In the 1980s, manufacturers complained that electronics assembly was difficult because designers forced 20 pounds of, shall we say, stuff into a 10-pound bag. Now, assemblers grumble that designers cram 60 pounds of stuff into a 10-pound bag. These complaints are not your fault! You provide the customer exactly what they ask for. Today, the trends toward miniaturization, high-density, closely-spaced components, and higher performance are accelerating. In response, you provide a design for an elegant electronics assembly with a tiny footprint where everything fits together logically.

Manufacturers, including engineers and assemblers, must convert their logical design into a reliable, functioning product. Once you translate the grumbles like “we can’t assemble this” and understand the root causes of the problem, you as a designer can place yourself at a great advantage in working successfully with manufacturers. You can provide immense value to manufacturers, even if you never set foot in an assembly plant.

Achieving successful electronics assembly involves not only the spatial and structural relationships between materials, but also the interaction between those materials with process chemicals. The field is critical cleaning, and I am known as The Cleaning Lady. Many, if not most manufactured objects, require cleaning to function reliably. Cleaning is removing soil, or matter out of place.

Soils are broadly classified into thin film or particulate. They may be organic (carbon-based) or inorganic. They may be biological or non-biological, living, dead, or never alive. They may adsorb into and soft materials. They are very often mixed. If we don’t want the material to be present in the assembly, it is a soil.

Failure to adequately remove soils can result in physical and chemical issues. Residual soil can interfere with the spatial relationships among components. The residual soils can chemically alter the construction materials and coatings as well. In sealed coated systems, residue can volatilize and redeposit onto other areas which can physically change the product. In electronics, inadequate cleaning can degrade the adhesion and cohesion of conformal coating.

Residual soils can impact resistivity. The product may fail initial resistivity tests; or, even worse. It can fail  unexpectedly and catastrophically in the field. The soils may even remove essential fabrication and assembly process chemicals.  

While metalworking fluids are essential to form the part, you must remove them prior to plating, deposition, or final assembly once they have served their purpose. You need rogues and polishing compounds to achieve the correct surfaces for optics, but you must remove them before final coating. You must even remove the chemicals you use in cleaning (termed cleaning agents).

Flux is a cleaning agent that cleans the surface. It removes surface oxides while preparing the surface for very effective soldering. In ancient days, jewelers use the citric acid in lemon juice as a flux in jewelry fabrication. They often used other acids such as boric acid in jewelry-making as well. People even proposed fluxes made of lemon juice for commercial electronics assembly.

However, most commercial electronics fluxes are complex mixtures. In the 1980s, rosin-based fluxes were predominant in high-value applications. The residue was inert, and it did not interfere with product performance. The residue looks amber, and sometimes referred to as encapsulated. You could remove such fluxes with blends containing CFC-113. Unfortunately, CFC-113 contributes to depletion of stratospheric ozone. Anticipation of a global phaseout of CFC-113 impelled industry-wide programs to develop and test alternative processes.

One approach was to use “no-clean” flux. Many formulations were developed. I recall discussions where some urged that we call no-clean flux “low residue flux.” The flux doesn’t magically disappear. Residue remains, but you might not need to remove it.  Although cleanliness test protocols were acceptable, no one could swear that the residue would never interfere with performance. However, in the euphoria of the day, the term no-clean flux stuck; electronics assemblers stopped using ozone-depleting chemicals, figuring that no-clean means no residue.  

In that same era, the use of organic acid (OA) flux also increased, even for high-end applications, because you can readily rinse it with water. People recognized that, all other things being equal, the residue of OA flux is more active. Active residue is not desirable; it can damage the product and interfere with performance. However, for the designs of the time, residue was readily kept to an acceptably low level using water-based cleaning methods.

Times have changed. For many, if not most applications, fluxes are cleaned, often in water-based (aqueous) processes. The challenges to achieve low residue levels have increased as well. At the request of assemblers, designers now must fit 60 pounds of stuff in a 10-pound bag. Assemblers complain, in part, because they are continuously adapting cleaning systems that were developed for the products of yesteryear. You can help find solutions by understanding what happens when today’s assembly design bumps into the physics and chemistry of cleaning.

Would you like to find out more about how Altium can help you with your next PCB design? Talk to an expert at Altium.

About the Author

Barbara Kanegsberg

Barbara, widely known as "The Cleaning Lady", is an expert and trusted adviser in critical cleaning. Critical cleaning is soil removal where, if you don’t do it, product quality suffers. Her manufacturing activities encompass optics fabrication as well as assembly of aerospace components, medical devices, advanced automotive, additive manufacturing as well as electronics assembly. Her company, BFK Solutions, founded in 1994, continues to be the leader in critical cleaning consulting. She has over 30 years of experience in manufacturing. Her background also includes chemistry and biochemistry. Her involvement in industry standards-setting includes IPC, military specifications, and ASTM. She is a U.S. ISO expert. She and Ed Kanegsberg (The Rocket Scientist) write Clean Source, an approximately monthly e-newsletter, that provides practical ideas to improve cleaning, contamination control, and product quality. They are co-editors of and contributors to the acclaimed two-volume “Handbook for Critical Cleaning,” CRC/Taylor & Francis, 2011.

Visit Website More Content by Barbara Kanegsberg
Previous Article
The Art of Selecting Connectors
The Art of Selecting Connectors

How to pick connectors in a world that hates plugging things in.

Next Article
The Essential Tools You Need for PCB Design
The Essential Tools You Need for PCB Design

How do you compare PCB design tools for different board designs? Let’s take a look at the essential feature...

×

Trade In Your Outdated Design Tool & Unlock 45% Off Altium Designer. Sign up and an Altium representative will be in contact shortly.

First Name
Last Name
Company Name
Phone Number
Country
State
Postal Code
Acknowledging Altium’s Privacy Policy, I consent that Altium processes my Personal Data to send me communications, including for marketing purposes, via email and to contact me by phone.
!
Thank you!
Error - something went wrong!