Multi-board design projects in Altium Designer

April 12, 2016 Chris Carlson

I was working with a customer recently who had two PCBs that were related. In this multi-board design project he wanted to work from a single schematic package, yet have a subset of the schematics populate two different printed circuit boards.  It’s a common enough scenario, and it’s reasonably simple to achieve in Altium Designer. Here’s how.

 

At the time of publishing, Altium Designer currently supports only one PCB per PCB Project. In other words, each PCB project targets only a single circuit board.  So in order to have related schematics populate different PCBs, we first need to have multiple PCB Projects (PrjPCB), one for each board we are targeting. The secret to amalgamating the schematics is to have a third project for the overall layout design that doesn’t target a board, but acts as the design project for the multi-board system. Multi-board doesn't have to be hard, this will help, trust me.

 

Consider the Design Workspace in the figure below.  Here we have three PCB projects. The first -PCB_Project1.PrjPCB - contains the complete set of the schematics for the two PCBs.  It is in this project that all schematic capture design, electrical rule checking, etc. takes place.  This is in fact the master design project for all boards to made from the design. Since all of the schematics are in the same project, their net connectivity will be extant throughout the design.

 

multi-board projects

 

The remaining two projects - PCB_Project2.PrjPCB and PCB_Project3.PrjPCB - contain a subset of the schematics in the first project, as well as the PCBs which will be updated by the defined schematic capture subsets.  PCB_Project2.PrjPCB and PCB_Project3.PrjPCB simply have the appropriate schematics added to them by right clicking on the PrjPCB file and using the "Add Existing to Project" command to add the relevant schematics.

 

At this point any changes made to the schematics in PCB_Project1.PrjPCB will be reflected in the schematics of the other two projects, as the schematics you’ve added to these are in fact the same files contained in the master project.

 

When the PCBs are updated in PCB_Project2.PrjPCB and PCB_Project3.PrjPCB, only those schematics contained within each PCB Project will be reflected in the updates.

 

While the demo design used in this blog targets just two PCBs, this technique can be used for any number of printed circuit board designs and provides a simple way to consolidate the front-end schematic design of complex multi-board projects. 

 

And there you have it, an approach to multi-board design that will allow you to work from a single schematic package and have a subset of the schematics populate two different boards. Try it out and let me know how it works for you. 
 

And if you are just discovering Altium for the first time and want to design a multiboard PCB fabrication project using Altium Designer, try our PCB design software free download

 

Check out Altium Designer in action...

Interconnected Multi-Board Assembly

About the Author

Chris Carlson

Sr. Field Application Engineer Chris Carlson came to Altium in August of 2007 and brings with him his background in power electronics, data acquisition, and controls. Chris earned his Bachelor of Science degree from Oregon State University in 1993 and has worked as a design engineer in the Bio-Medical, Industrial Controls, Motor Drive, and Defense industries.

More Content by Chris Carlson
Previous Article
Is Your Company Data as Secure As Pictures of Your Food?
Is Your Company Data as Secure As Pictures of Your Food?

Consumer products such as smartphones carry priceless data of sentimental value and accordingly service pro...

Next Article
Collaborative Design Part 3: Crossing the ECAD/MCAD Bridge
Collaborative Design Part 3: Crossing the ECAD/MCAD Bridge

Interfacing between electrical and mechanical design software is one of the most important forms of design...

Get My Altium Designer Free Trial Today or Call 1-800-544-4186

Get Free Trial
×

Enjoying our blogs? Subscribe to our mailing list to have a weekly Altium blog digest sent to your inbox.

First Name
Last Name
Country
Acknowledging Altium’s Privacy Policy, I consent that Altium processes my Personal Data to send me communications, including for marketing purposes, via email and to contact me by phone.
!
Thank you!
Error - something went wrong!