PCB Design and Layout

Test-Driven Development for Embedded Systems 2 min OnTrack

What is Hardware-in-the-loop testing and how it can save you time and resources when designing your board? Watch this podcast episode with Ari Mahpour to learn more.

How to Use Input Impedance in Circuits and Transmission Lines 6 min Blog

The concept of input impedance is used to understand power transfer and matching in complex interconnects.

Altium Designer Helps You Track Reference Designators on Your PCB 8 min Blog

Make sure you use the correct reference designators in your PCB and in your drawings, schematic sheets, and circuit board layout.

Low Cost Solutions for Hardware in the Loop Testing Automation 7 min Blog

A project overview demonstrating low-cost solutions for automated hardware in the loop testing using the Pytest framework

What PCB Copper Thickness Should You Use? 6 min Thought Leadership

Do you know what PCB copper thickness you should use in your circuit board? Learn more about 0.5 oz/sq ft or 1.0 oz/sq ft copper thickness standards and what it means for your fabrication process in this guide.

Total Harmonic Distortion In Power Systems 7 min Blog

Total harmonic distortion is used to quantify the quality of power that reaches your electronics.

What is High Speed PCB Design? 12 min Blog PCB Design Engineers

PCB Design Engineers

Electrical Engineers

Learn more about what is high speed board design and how to successfully design and route your high speed printed circuit board layout.