How to Route and Tune High-Speed Topologies with xSignals

Created: October 21, 2018
Updated: March 16, 2020

most recent articles

RF PCB Material Comparison for mmWave Devices Here’s a comparison of the best RF PCB materials or your high-frequency analog products. Read Article

All About IPC-4101 and IPC-4103 Slash Sheets PCB laminate material requirements are outlined in slash sheets as specified in the IPC-4101 standard. Read our guide to learn about this standard and how materials are specified. Read Article

Troubleshooting EMC from Your Workbench EMC expert Ken Wyatt joins us in this episode to answer frequently asked EMC questions—a sneak peak to his EMC Book Series. Read Article

Your Guide to Transmission Line Losses in Electrical Systems Learn everything you’ve wanted to know about transmission line losses and how to analyze them on your PCB. Read Article

Designing for Multiple PCBs in the Same Project Majority of our PCB designs sit as a single PCB under our Altium Designer projects (i.e. .PrjPcb file). Now and then, we design using variants with different stuffing options. It seldom happens that we have a single project that requires multiple PCBs with various stuffing options, but when it happens, a lot of us tend to get stuck. All too many times, I have seen designers fork (i.e., copy and paste) a project and then add slight variations to Read Article

Leveraging the Free Footprint Community to Design at Lightning Speed One of the biggest hurdles individuals and startups face with creating new PCB designs is footprint creation. Designing footprints is a job most people hate. It’s tedious, time consuming, and doesn’t result in much except, well, a footprint. Companies now realize this pain point and offering designers free, well-designed PCB footprints. Why would they spend their time doing this? Imagine Company A sells a connector for $5.00, but no footprint is Read Article

Configuring a Hardware in the Loop Project This article will walk through an example project of a board designed in Altium Designer and run through a DevOps flow using hardware in the loop testing against its firmware. Read Article

Designing 5G Devices The next stage in the evolution of mobile telephony is here with the roll-out of 5G. The designer looking to incorporate functionality to handle 5G signals into their circuits will face some challenging issues. So, what’s so special about 5G. The main change in the jump from 4G to 5G is the frequency band at which signals are transmitted. For 4G, this band covered 0.7 GHz up to 2.5 GHz. For 5G, this new band is an order of magnitude larger, with Read Article

The Digital Engineer's Guide to RF PCB Layout and Routing Read our guide to learn some best practices for RF PCB layout and routing. We’ll also look at how simulation tools can help you evaluate your RF PCB layout. Read Article

Continuous Conduction Mode in an SMPS: What is it and Why it Matters Learn more about continuous conduction mode and how to design to this condition in your power supply. The best design and simulation tools can help you verify continuous conduction mode is reached. Read Article

Back to Home